|
|
Introduction HT-150 is a new-type of the shallow hole drill which is mainly used in engineering geological exploration and it can also be used to geological core drilling and small-scale water well drilling. |
Features
1. The drill is a device with mechanical transmission system and hydraulic pressure automatic feeding system, with high drilling efficiency. So it can lessen the labor intensity.
2. With a wide range of speed and a broad application.
3. Large drilling torque, high strength and strong capacity of drilling.
4. With large diameter hole of spindle, and a good applicability in drilling technology.
5. Equipped with ball holder, it can life without stopping machine. So it is safe and reliable and has good serviceability.
6. Water pump and drill are installed on the different frameworks. They can be driven by the same power or driven by the power separately for convenient disassembly or shipment.
Technological Date of Drilling Rigs
|
Type |
HT-150 |
HT-150A |
HT-150K |
HT-150G |
HT-150E |
|
Drilling depth(Φ42 rod) |
150m |
150m |
150m |
150m |
150m |
|
Driving drill rod(Mutsukata) |
Φ51x46mm |
Φ51x46mm |
--- |
Φ51x46mm |
Φ51x46mm |
|
Swivel headspeed(r/min) |
58, 130, 268, 415, 598 |
83, 186, 382, 592, 854 |
4.4-455 |
99, 222, 456, 707, 1019 |
99, 222, 456, 707, 1019 |
|
Vertical shaft Max output-torque(KN) |
1275 |
1115 |
1250 |
725 |
750 |
|
Vertical shaft Max lifting-force(KN) |
30 |
30 |
30 |
30 |
30 |
|
Vertical shaft Max pressure(KN) |
23 |
23 |
23 |
23 |
23 |
|
Swivel head circumvolve angle |
360o |
360o |
360o |
360o |
360o |
|
Single-rope lifting-force(KN) |
12.5 |
12.5 |
12.5 |
11 |
11 |
|
Single-rope lifting-speed(m/s) |
0.32-3.23 |
0.23-3.23 |
--- |
0.413-4.237 |
0.413-4.237 |
|
Engine type(Diesel engine) |
S1100 |
S1100 |
YCT225-4A(Motor) |
S1100 or S1110 |
Zs1105 |
|
Net weight(Kg) |
380 |
380 |
530 |
380 |
530(including pump) |
|
1.HT-150 series drilling can share power with BW-160H mud pump. The type of diesel engine is S1110. 2.HT-150 series drilling can need according to user to choose to following installation: Mobile oil cylinder, hydraulic pressure chuck(HT-150C), trail car(HT-150D), impact function(HT-150H), drilling tower, trail car and pump(HT-150Z). 3.Speed can be selected in HT-150, HT-150A and HT-150G according to needs. 4.HT-150K can be used in high pressure jet-grouting construction. |
Pump dis-placement: 100L/min | ||||
|
Pump's press: 0.7 Mpa | |||||
